Safety Switch|Disconnect; GD; Non-Fused; Non-fusible, single-throw; 100 A; 2 Pole

OVERVIEW

Features and Benefits:

• Ample wire bending space provides for easier installation
• Visible double-break quickmake, quick-break rotary

blade mechanism

• Side opening door on all enclosures
• Mechanically interlocked cover to prevent easy

access when the switch is in the ON position

• With Class R fuses, switches may be used on systems capable of delivering 100,000A rms symmetrical
• Clearly visible and accessible neutral where applicable
• Visible ON/OFF indication
• Tangential knockouts on 30-60A designs
• Ample wiring space
• Double padlocking capability on 30-100A
• Triple padlocking capability on 200-600A
• Additional door locking capability
• Bilingual English/Spanish door label on 30-100A
• Tri-lingual nameplates

All general-duty switches above 100A and all heavyduty

switches incorporate these K-Series switch design features.

• Two points of contact provide a positive open and close, easier operation, and also help prevent contact burning

for longer contact life

• Protects against accidental contact with energized parts. Probe holes enable the user to test if the line side is energized without removing the shield. Not typically provided on general-duty switches, but available as a field kit or factory installed
• Provide easy removal of fuses
• The position (ON or OFF) can be clearly seen from

a distance and the length provides for easy operation

• Personnel safety feature since the large hasp can

accommodate up to three 3/8-inch (9.5 mm) shank locks

• Cabinet door can be further padlocked at the top and

bottom as applicable

• Door cannot be opened when the handle is in the

ON position. Front and side operable defeater mechanism provides for user access when necessary on singlethrow

switches

• An ample number are provided on the top, bottom and sides of both NEMA Types 1 and 3R enclosures through 200A
• For switches in a NEMA Type 3R, 30-200A. Use a Myers type hub for all others